The assembly kit is complemented by all kinds of accessories, thanks to which the aeroplane and vehicle replicas have even more details. Resin and photo-etched modelling accessories are products that will be appreciated by every enthusiast - thanks to them, complex sets will gain a realistic finish.
Many types of modelling accessories
Here you will find, among others, accessories for models produced by Eduard, one of the leading manufacturers of model kits. We offer modelling elements that can be used to add more detail to vehicles and planes: wheels, fuel tanks, pilot seats and exhaust tubes. Due to the fact that replicas of war equipment dominate the modelling industry, you will also find here miniature weapons appropriate to the era.
Plastic, from which parts for model building are often made, does not always make it possible to create models with a large number of details. Therefore, other solutions are used to create a replica rich in details. Modelling accessories can be made of various materials: resin elements, parts made using 3D printing, and photo-etched frets. It is the latter that perfectly complement plastic replicas.
Photoetched parts for models
The Eduard brand is one of the main suppliers of photo-etched details used in modelling. These accessories give the replicas a detailed look, which is why they enrich the models. Parts made of brass and copper are produced for a specific type of aircraft or vehicle, as well as for the scale in which it was made. Thanks to this, it is possible to create a replica with a realistic appearance and many details, even on small surfaces. Such a detailed effect is due to the photolithography technique. While other modeling accessories are most often small three-dimensional parts, photoetched elements come in the form of ready-made sets on sheets. From these they need to be cut out, shaped and then placed on the model for which they were intended.
Modelling tape mark Tamiya 6mm with length 18m REFILL
Control panel for P-39 Q Airacobra late Coloured, ready for assembly.
Modelling tape mark Tamiya 10mm with length 18m REFILL
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
Control panel for Hurricane Mk I late and Mk II. Coloured, ready for assembly.
Excellent control panel for Arma Hobby kit 1/72 scale. Requires careful bending.
Excellent control panel for Arma Hobby Yak-1b kit 1/72 scale.
Additional detail set for Arma Hobby Yak-1b.
Set of two painted photoetched pilot seatbelts for Arma Hobby Yak-1b.
Excellent control panel for Arma Hobby Yak-1b kit 1/72 scale.
Photoetched pilot seatbelts for US aircraft WW2
Exceptional control panel for Arma Hobby FM-2 Wildcat kit 1/72 scale.
Exceptional control panel for Arma Hobby F4F-4 Wildcat kit 1/72 scale.
Photo etched and printed instrument panel for Mustangs in the British version
Photoetched colour printed instrument panel for Mustangs in the U.S. version
Ready-to-use, painted instrument panel for the 1/72 scale Ki-43-II Hayabusa
Modelers glue from series Quick Type
Modelling tape mark Tamiya 18mm with length 18m REFILL
Resin underwing fuel tanks for Hawker Hurricane II/IV model kits 1/72 scale
US WWII Pitot Tube - "Shark-fin" type probe (1 pc) - used P-39 Airacobra and many more
WWII USA pitot tube ("shark fin") for P-39 Airacobra and others.
World War II-era "L-shaped" Pitot Tube probe. USA
3D-Printed Accessories Designed for the Arma Hobby kit
Modelling tape 6mm from Tamiya with 18 length
Two turned brass barrels cal .50 (12.7mm) for US model aeroplane WW2 1/.2 scale .
E16A1 Zuiun weapons dedicated for 1/72 scale
Printed 3D resin wheels dedicated for model J1N1-S Gekko in scale 1/72
Weapons dedicated for models J1N1-S Gekko in scale 1/72
3D-Printed Accessories Designed for the Arma Hobby kit
The set include turned brass Pitot Tube, 23mm cannon barell and undercarriage position indicators.
Controls Panel 1/48 for Hurricane Mk II
Pilot Figurine for Hurricane kit from Arma Hobby, 1/48.
Hurricane Mk I control panel for 1/48 kit from Arma Hobby
Modelling tape mark Tamiya 10mm with length 18m
Modelling tape mark Tamiya 40mm with length 18m
3 D printed fuel tank for 1./72 scale F4F-4 wildcat from Arma Hobby
3D printed Wildcat wheels, fits Arma Hobby, scale 1/72
Precision assembly jig for Ki-43 1/72 – Arma Hobby!
Precision assembly jig for P-39 1/72 – Arma Hobby!
Precision assembly jig for Hurricane 1/72 – Arma Hobby!
Precision assembly jig for Yak 1b 1/72 – Arma Hobby!
Wydruk 3D, akcesoria modelarskie dedykowane do modelu Arma Hobby. ...
Detail set for PZL P.11c Expert Set 1/72
Modelling epoxy putty from series Quick Type
Modelling tape mark Tamiya 18mm with length 18m
Panel Accent Color Black Volume:40ml
Panel Accent Color D Brown Volume:40ml
Panel Accent Light Gray Volume:40ml...
Tamiya 87199 Panel Line Accent Color dark Grey Volume:40ml...
Tamiya 87132 Panel Accent Color Brown Volume:40ml...
Tamiya 87133 Panel Accent Color Gray Volume:40ml...
Hawker Hurricane Mk.IIb - Browning .303 cal barrel tips and bead sight mount
Masks for P.11c
Rocket launcher type "Bazooka" for P-51 B/C Mustang kit 1/72
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
Message us on WhatsApp 
Polish