The assembly kit is complemented by all kinds of accessories, thanks to which the aeroplane and vehicle replicas have even more details. Resin and photo-etched modelling accessories are products that will be appreciated by every enthusiast - thanks to them, complex sets will gain a realistic finish.
Many types of modelling accessories
Here you will find, among others, accessories for models produced by Eduard, one of the leading manufacturers of model kits. We offer modelling elements that can be used to add more detail to vehicles and planes: wheels, fuel tanks, pilot seats and exhaust tubes. Due to the fact that replicas of war equipment dominate the modelling industry, you will also find here miniature weapons appropriate to the era.
Plastic, from which parts for model building are often made, does not always make it possible to create models with a large number of details. Therefore, other solutions are used to create a replica rich in details. Modelling accessories can be made of various materials: resin elements, parts made using 3D printing, and photo-etched frets. It is the latter that perfectly complement plastic replicas.
Photoetched parts for models
The Eduard brand is one of the main suppliers of photo-etched details used in modelling. These accessories give the replicas a detailed look, which is why they enrich the models. Parts made of brass and copper are produced for a specific type of aircraft or vehicle, as well as for the scale in which it was made. Thanks to this, it is possible to create a replica with a realistic appearance and many details, even on small surfaces. Such a detailed effect is due to the photolithography technique. While other modeling accessories are most often small three-dimensional parts, photoetched elements come in the form of ready-made sets on sheets. From these they need to be cut out, shaped and then placed on the model for which they were intended.
Laser cut mask set for Hurricane MK I from Arma Hobby 1/48
Laser cut mask set for Sea Hurricane MK IIc from Arma Hobby 1/48
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
A set of essential accessories for the Hurricane Mk I in 1/48 scale
Diorama base for model aeroplane 1/72.
Diorama base for single aeroplane model 1/72.
12 bombs for US aircraft in 4 weight classes – plastik kit for 1/72 scale aeroplanes.
Limited Jak-1b upgrade set: new clear sprue, masks and Arma Hobby Jig for kits already in your stash....
Precision assembly jig for Ki-43 1/72 – Arma Hobby!
Precision assembly jig for P-39 1/72 – Arma Hobby!
Precision assembly jig for Yak 1b 1/72 – Arma Hobby!
Precision assembly jig for Hurricane 1/72 – Arma Hobby!
Wydruk 3D, akcesoria modelarskie dedykowane do modelu Arma Hobby. ...
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit
3D-Printed Accessories Designed for the Arma Hobby kit.
3D-Printed Accessories Designed for the Arma Hobby kit.
Akcesoria Eduard 1/48
Akcesoria Eduard 1/48
Akcesoria Eduard 1/48
Akcesoria Eduard 1/48
Two turned 12.7mm MG barrels for WWII US aircraft models.
Hawker Hurricane Mk IIC turned brass - Hispano Mk I 20mm cannons (with flat recoil springs)
Hawker Hurricane Mk IIC - działka Hispano Mk II 20mm z okrągłą sprężyną (4 szt.)
WWII USA pitot tube ("shark fin") for P-39 Airacobra and others.
Accessories for Arma Hobby PZL P.11c Expert Set 1/48, MG barrels, gunsight and Venturi
Accessory set for PZL P.11c Expert Set 1/48
Hawker Hurricane Mk.IIb - Browning .303 cal barrel tips and bead sight mount
Two turned brass barrels cal .50 (12.7mm) for US model aeroplane WW2 1/.2 scale .
Hawker Hurricane Mk IIC turned brass - Hispano Mk I 20mm cannons (with flat recoil springs)
Hawker Hurricane Mk IIC - Hispano Mk II 20mm cannons (with round recoil springs)
The set include turned brass Pitot Tube, 23mm cannon barell and undercarriage position indicators.
US WWII Pitot Tube - "Shark-fin" type probe (1 pc) - used P-39 Airacobra and many more
World War II-era "L-shaped" Pitot Tube probe. USA
Zestaw akcesoriów do modelu PZL P.11c Expert Set 1/72
Detail set for PZL P.11c Expert Set 1/72
Hawker Hurricane Mk.IIb - Browning .303 cal barrel tips and bead sight mount
3D printed decal and PE parts for Arma Hobby P-51C Mustang
Rocket launcher type "Bazooka" for P-51 B/C Mustang kit 1/72
3 D printed fuel tank for 1./72 scale F4F-4 wildcat from Arma Hobby
3D printed Wildcat wheels, fits Arma Hobby, scale 1/72
Photoethed flaps for the Hawker Hurricane Mk I model kits 1/72 scale from Arma Hobby
Masks for P.11c
Photo eteched details for FM-1 Wildcat kit from Arma Hobby, 1/72
1:48 RAF pilots from the Malta campaign, World War II.
Message us on WhatsApp 
Polish