1 Man Army 48KIT003 Full Masking Set Hurricane Mk.I (Arma Hobby).
- Add feedback:
- OMA48KIT003
- Manufacturer: 1 Man Army
-
Availability:
Unavailable
Delivery time: 1-3 days
- Type: Aeroplane accessories
- Medium: laser cut masks
- Scale: 1/48
- Remarks: For Arma Hobby Hurricane MK I kit 40015
Laser cut mask set for Hurricane MK I from Arma Hobby 1/48
| scale: | 1/48 |
1Man Army Paint Masks – Hurricane Mk I (Arma Hobby 40015) 1/48
Complete set of paint masks for all markings included on the decal sheet of the Arma Hobby 40015 – Hurricane Mk I kit. Allows you to apply the entire set of markings with an airbrush, without using decals.
The masks cover all elements from the decal sheet of kit 40015 – from squadron codes and serial numbers to the smallest maintenance stencils. This is a solution for modellers who want maximum realism and full control over the final appearance of the markings.
Why 1Man Army masks?
- Laser-cut – extremely sharp edges and high precision
- Allow reproduction of very fine markings in 1/48 scale
- Perfect for airbrush application
- No decal film – markings become an integral part of the paintwork
- Easier weathering already at the marking painting stage
What’s included?
- Complete set of masks for all markings from the decal sheet of the Hurricane Mk I 40015 kit
- Roundels, fin flash, codes, serial numbers and a full set of stencils
Technical information
- Scale: 1/48
- Intended for: Arma Hobby Hurricane Mk I – kit 40015
- Technology: laser cutting
- Type: self-adhesive masks, single-use
1Man Army masks are a tool for those who want to paint markings the way it was done on real Hurricanes – with paint, using stencils, and with full control over colour and wear.
1 Man Army Masks – What They Are and How to Use Them
1 Man Army masks are precisely laser-cut adhesive stencils designed for painting markings, tactical numbers, and technical stencils directly onto the model – without the use of decals. This method produces a more realistic and durable finish, free from the visible edges that can occur with traditional decals.
How to use 1 Man Army masks:
- Detach the selected element from the sheet (e.g., a number or label). Apply a piece of masking tape or clear transfer tape over the entire marking.
- Use the tape to transfer the mask to the model without distorting its shape or alignment.
- Press the mask firmly onto the model's surface, especially around the edges.
- Carefully remove the transfer tape, leaving the mask in place.
- Apply a thin layer of paint – ideally with an airbrush.
- Once the paint is dry, remove the mask to reveal a clean, sharp marking.
Masks are intended for single use and should be applied only to clean, dry, and degreased surfaces.
Accessories for Arma Hobby Hurricane I/II 1/48
Hurricane Mk I Trop 1/48 (40016) – the tropical take on a familiar Hurricane
Message us on WhatsApp 
Polish